Zero Unit (Clone)

From Digimon Super Rumble Wiki
Revision as of 11:27, 20 December 2023 by Josma (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

In Digimon Super Rumble a digimon's stats are decided upon hatching. These stats can be further viewed and changed, meaning any digimon can have perfect stats potentially. The system to change the hatching stats (referred from here on as correction stats) is called correction.

Correction Rules

Example of the correction menu and how stats are displayed.

Like stated earlier every single digimon has correction stats, the stats can be viewed at the elecmon NPC below through any of his menus that apply to your digimon. This system follows the following rules:

  • The total Stat amount obtained from this system cannot surpass 28%.
  • It is not possible to have more than 14% investment in a single stat.
  • Every stat gained is shown as a BLUE orb that can have values from 1% to 4%.
  • Possible stat rolls will be for HP/SP/STR/INT/DEF/RES/SPD ( Making this the only system in the game capable of increasing a digimon's HP/SP values)
  • Every RED orb means a failed calibration and that orb does not give any stats. This can be changed.
  • If your grid displays all orbs as gray, you can do a initial calibration to get a random stat assortment.
  • Since you can only get fixed values from 1% to 4% to hit the 28% total you have to get 12%/12%/4% spreads because of not being able to get more than 14% in a single stat. 153hour eggs also give that same stat spread.
  • Any 14% spread will max out at 14%/12% for 2 stats.




-

Where is correction system NPC?

Elecmon correction.png

-He will always be found in the village right next to the evolution NPC Bokomon.

His menus are structured as follows, and you are required to press the digivice buttons to change options. Look below for the options:

The left button on the digivice will always confirm the current option... The buttons on the right will cycle up and down on the menu options as shown below... The Please Choose option only displays first when you open the menu, and when cycling through again you will go from Initial Calibration to Recalibration of Failures.

Correction Options.png

Recalibration Of Failures

Confirming for this option is available if your digimon has RED stat orbs. Any digimon without RED orbs will be excluded from the list for this option.

Shining zero unit item ( Blue)
Recalibration Of failures.png


To use this function simply select ONE red orb and then click the bottom right button,

This option requires 1x Shining Zero Unit to change the stats each time.

If the item is in your inventory the correction attempt occurs.

Ps: Using this option it is necessary to fix the stats one by one.





-

Partial Recalibration

Confirming this option is avaliable for all digimon with at least 2 BLUE stat orbs. It is the main way to change stats.

Partial Recalibration.png
Broken Zero Unit Item.


For this option you need to select 2 stats that are next to each other. The last and first position also count as next to each other for this purpose.

Once selected you can click the bottom right button to confirm the selection.

This option requires 1x Broken Zero Unit to change the stats each time.

It will overwrite any previous stat rolls for the selected stats.

Ps: This option obeys the rules above, so if you have 14% of any stats, you will no longer roll for that stat.



-

All Recalibration

Confirming this option is available for all digimon that have set their stats at least once.

All recalibration menu.png


For this option simply select a digimon from the menu and click the bottom right button.

This will roll a random calibration, which will randomize all orbs.

You can change the stats that you get from this option using any of the options above.

This option requires 1x Zero Unit to change the stats . It can be done as many times as you want.

Ps: It is possible to roll for more or less red orbs using this option. It is not recommended since it is a 50% chance to get a blue orb each time.


Zero Unit item (Green)



-

Initial Calibration

Confirming this option is available ONLY for digimon without any stats (all orbs are gray).

Initial Calibration.png


For this option simply select a digimon from the menu and click the bottom right button.

This will roll a random calibration, similar to the All recalibration above, which will randomize all orbs.

You can change the stats that you get from this option using any of the options above.

This option requires 1x Zero Unit to change the stats .It can only be done once.






-

Chances & Odds:

Recalibration probabilities.

Success: 50%

Failure: 50%

-

Value probability.

1%: 25%

2%: 35%

3%: 30%

4%: 10%

-

Random Stat probability.

HP:1/7 (14.285%)

SP:1/7 (14.285%)

STR:1/7 (14.285%)

INT:1/7 (14.285%)

DEF:1/7 (14.285%)

RES:1/7 (14.285%)

SPD:1/7 (14.285%)